Use at your own discretion.
2. Drive bushings out of knuckle with the proper removal/installation tool. 3.
Remove all foreign material from kingpin areas of the steering knuckle and axle beam. 4. Wire brush machined surfaces, taking care not to damage them. Clean kingpin bore. 5. When installing the bushings, lightly lubricate the outside diameter to make installation Missing: Millersville. King Pin, Spring Pin & Bushing Tools.
As best shown in FIG.
Precision tooling that makes installation reliable, quick, and easy. Our King Pin, Spring Pin & Bushing Tools are proudly made in the USA and are simpler to install than other products on the market. 3. Use the grease cap to press out the kingpin bushing and seal. Remove the grease zerk in the grease cap or use a hollow driver, to press out the kingpin bushing. 4. Use the same procedure to remove the kingpin bushing in the upper kingpin connection.
5. Clean the parts and then inspect before reassembling. STEERING KNUCKLE BORE MEASUREMENTMissing: Millersville. Mar 12, Unscrew mounting nut (2) from tube-shock and pull it clear of stud. 6. Remove nuts (1) from kingpin lower plate and rotate the diagonal strut (3) out of the way. 7. Remove the ball joint (2) from the spindle. 8.
I am tempted to say if you have never done them or have to ask how to do them it might be something to have more experienced person do.
Remove one screw from the damper blade mounting plates and turn the lower plate outboard to free the blade. The kingpin bushing installation tool is a dual-headed insertion tool for installing kingpin bushings within the cylinder cavities of a steering knuckle. The kingpin bushing installation tool includes a rod having opposed upper and lower ends. An upper bushing-engaging member is mounted on the upper end of the rod and includes an upper portion, an intermediate portion and a lower portion.
Feb 27, Rarely are two kingpin jobs the treepruning.club fall out,others have to be beaten out with treepruning.club your wheel,brakes,backing plates,tie rod,treepruning.club tapered locking pin in axle eye,and top and bottom caps on treepruning.club king pin out,hopefully comes out treepruning.club sure your play was not in the axle itself,whole different job,treepruning.club severe cases,have had to remove axle,and press pin treepruning.club or cut old bushings.
This is how to remove the kingpin and bushings on Yamaha golf carts G2-G